Explore the Benefits of Silicone Epoxy

SPECIFICATIONS

Brand: hauae

Brand Name: NONE

Capacity: 300g, 200g

Certification: None

Color: Black, white, grey, transparent

Curing time: 24 hours

DIY Supplies: Electrical

High-concerned chemical: None

Model Number: H594 h598 H599

Model number: H594 H595 H598 H599 H301 H302

Name: Electronic potting glue

Origin: Mainland China

Production place: China

Shelf life: One year

Type: Silicone Sealant,Silicone AB adhesive (soft adhesive), Epoxy AB adhesive (hard adhesive)

is_customized: Yes

1kg Electronic potting glue silicone epoxy AB two component thermal conductivity flame retardant insulation Silicone resin epoxy

Characteristics of two-component electronic potting adhesive

1. Sealed, insulated, waterproof, moisture-proof, dust-proof, hard glue can be kept secret, not easy to peel off

2. The glue has good fluidity, self-leveling and good permeability

3. Soft rubber resistant to high temperature 200℃, low temperature -50℃, no aging

4. Soft gel after curing, no damage to components, removable, easy to repair, hard glue can keep the circuit board secret

5. Mixing by weight ratio 1:1, easy to operate

6. After mixing, it can be cured naturally or cured quickly by heating

The two-component silicone potting adhesive is mainly used for the overall potting protection of electronic and electrical industrial products. The glue has good fluidity and can be deeply cured after mixing in a specific proportion. The cured colloidal body is a soft elastomer with sealing and waterproof, insulation and thermal conductivity, high temperature resistance, flame retardant, earthquake resistance and corrosion resistance. Widely used in circuit boards, transformers, coils, high voltage packs, LED lights, sensors and so on

Operation procedure

1, before mixing: First of all, the A combination and B components, fully stir in a variety of packaging.

2, mixing ratio: according to the weight ratio of the proportion of mixing AB components.

3, mixing and stirring: fully stir evenly.

4, defoaming treatment: the container after mixing is left to stand for 5-10 minutes, and the bubbles are naturally discharged

5. Potting: Pour the mixed glue into the product as soon as possible

6, curing time: natural curing at room temperature

Product parameter

Brand: hauae

Name: Electronic potting glue

Type: Silicone AB adhesive (soft adhesive), Epoxy AB adhesive (hard adhesive)

Capacity: 1kg, 1.2kg

Color: Black, white, grey, transparent

Curing time: 24 hours

Shelf life: One year

Production place: China

Parcel list

1x electronic potting glue (1kg, 1.2kg)

Silicone potting adhesive FAQ

1. Glue has layers, and there is a layer of oil floating on the surface.

Answer: This reason is caused by precipitation, which is more common in the glue containing fillers, and only needs to stir all the precipitation of A and B respectively to be used normally.

2. Why does the mixed glue cure in some places and not in others?

Answer: Glue is not mixed, there will be this situation, when using, must pay attention to! Make sure that A and B are not precipitated, not stratified, and then fully mixed and evenly sealed into the product.

Epoxy potting adhesive hard adhesive

After curing, the surface of epoxy potting glue is bright, flat and hard. It is not easy to open after potting, and the hardness is high. The disadvantage is that it can not be repaired. Epoxy potting adhesive has the following properties: high strength, easy penetration, self-bubbling, anti-corrosion, good insulation, sealing and waterproof.

Applications: circuit boards, transformers, coils, high voltage packs, LED automotive electronics, regulator relays, power module sensors

Silicone potting adhesive soft adhesive

Silicone potting adhesive has rubber elasticity after curing, low viscosity after potting and can be disassembled for maintenance. Advantages: High and low temperature resistance can maintain rubber elasticity in the range of -60° to 200° for a long time, low shrinkage, thermal conductivity, flame retardant, insulation, sealing and so on.

Application: Lithium battery, circuit board, power supply, PCB, precision electronic components, solar energy, backlight and electrical module LED waterproof, moisture-proof, anti-gas pollution coating, pouring and potting protection

1kg Electronic potting glue silicone epoxy AB two component thermal conductivity flame retardant insulation Silicone resin epoxy

Unmatched Thermal Conductivity

The 1kg electronic potting glue silicone epoxy is specifically designed to enhance the thermal management of electronic components. This silicone epoxy effectively conducts heat, helping to dissipate it away from sensitive parts. Because it achieves superior thermal conductivity, it is ideal for use in environments where overheating could cause significant damage. Users often appreciate that this material helps maintain the optimal performance of their electronic devices.

Flame Retardant and Safe

One of the standout features of this silicone epoxy is its flame-retardant properties. It serves as an additional layer of safety for electronics, minimizing the risk of fire hazards. Many professionals in the electronics industry rely on this silicone epoxy for its ability to withstand high temperatures without igniting. Therefore, it gives users peace of mind knowing their devices are not only reliable but also safer to operate.

Versatile Insulation Properties

This silicone epoxy isn't just about thermal conductivity and fire safety; it also excels in insulation. Its unique formulation provides excellent electrical insulation, preventing short circuits and ensuring long-lasting performance. Additionally, it adheres well to various substrates, making it suitable for multiple applications in the electronics realm. As a result, this silicone epoxy helps in ensuring that every connection remains secure and insulated, thus enhancing the longevity and reliability of the electronic assemblies.